THE LONGHORN 12 VOLT- THE PROFESSIONAL & THE FARMERS MACHINE

All prices exclude hanpiece. See below or click here for more information about the Longhorn 12 Volt shearing machine.

Longhorn 12 Volt 3.5 machine. 3500 RPM for professional shearing.

Longhorn 12 Volt 3.5	Cost in £
Solid drive, without handpiece	459
Flexi drive, without handpiece	329
Solid adaptor, no drive, no handpiece	289
Solid adaptor and spring (adopts a lister solid drive to fit Longhorn 3.5 or 3.2)	39

(top)

Longhorn 12 Volt 3.2 machine 3,200 rpm for full time shearing

Longhorn 12 Volt 3.2	Cost in £
Flexi drive without handpiece	299
Solid adaptor and spring (adapts Lister solid drive to fit the Longhorn 3.2	39

(top)

 

Longhorn 12 Volt 2.8 machine 2,800 rpm. for dagging, shearing & cattle.

Longhorn 12 Volt 2.8	Cost in £
Flexi drive without handpiece	279

 

(top)

Longhorn Transformer. Longhorn machines can be used off the mains, without a battery using a transformer:

Transformer Mains to 12 Volt	Cost in £
Standard (for 1 or 2 machines)	115
Contractors (3 machines)	159
Switch (plus 2 shear pins)	8

Longhorn Spares

Longhorn Spares	Cost in £
7ft stand, splits in two	44
Relay	8
Switch (plus 2 shear pins)	8
Flexi drive inner only. NB Lister inners are too long for Longhorn 12v machines.	40
Flexi drive complete - inner plus neoprene outer	88
Flexi outer (heavy duty neoprene)	48
Solid adaptor plus spring	39

 

(top)

 

 

THE LONGHORN 12 VOLT- THE PROFESSIONAL & THE FARMERS MACHINE

Designed from 25 years of sheep shearing in the North Country. Manufactured by Horner Shearing.

1. Portable - shear anywhere.
2. All day off a spare 12 volt battery, or vehicle.
3. Safe - no electrocution worries even if tailing in the rain.
4. Neoprene flexible driveshaft for heavy wear doesn't crack. 6 foot long.
5. Quiet - no noise, no vibration, no smell.
6. Standard - fittings. Any pin type handpiece fits.
7. Pull cord switch.
8. Rugged construction for on farm use.
9. Reliable - made in Lancashire using space-age engneering.
10. Easy to use.

New - The Longhorn Transformer
240v mains to 12v D.C.
Available separately - shear at 12 volts from the battery in the field, or through the transformer via electric.

Recommended by farmers and professional shearers throughout Wales, England, Scotland and overseas:

The Longhorn is the best thing I've bought. We clipped hundreds of sheep with ours last year, on the moor. It saved long drives, and the mismothering of young lambs this caused. I wouldn't have thought anything run off a battery was capable of shearing, but one day alone we sheared over 300 Lonk and Gristone hoggs. The only charging the Escort van battery had was at meal times when we started the engine and left a brick on the accelerator for 5 minutes. Clipping has never been as quiet or easy. I'd recommend the Longhorn 3.2 to anyone.
Jim Cropper - Bacup, Lancs (Dog Trialist).

We didn't think it possible from a battery, but we tailed 1,200 (twelve hundred) sheep in one day with our Longhorn 2.8 without having to recharge and the battery was still strong when we finished.
E.K.W. Garstang, Lancs.

I thoroughly back the Longhorn 12 volt machine.
Richard Froggat - East Sussex.

I recommend the Longhorn 12 volt to anyone.
H. McIntosh - Ross-shire.

Many of our sales are now to overseas farmers, and we are looking for overseas agents for the Longhorn 12 Volt shearing machine.

(top)